D6384: tests: separate out bookmarks tests from test-share.t

martinvonz (Martin von Zweigbergk) phabricator at mercurial-scm.org
Thu May 16 07:58:45 EDT 2019


This revision was automatically updated to reflect the committed changes.
Closed by commit rHGfb00b3d76995: tests: separate out bookmarks tests from test-share.t (authored by martinvonz, committed by ).

REPOSITORY
  rHG Mercurial

CHANGES SINCE LAST UPDATE
  https://phab.mercurial-scm.org/D6384?vs=15128&id=15135

REVISION DETAIL
  https://phab.mercurial-scm.org/D6384

AFFECTED FILES
  tests/test-share-bookmarks.t
  tests/test-share.t

CHANGE DETAILS

diff --git a/tests/test-share.t b/tests/test-share.t
--- a/tests/test-share.t
+++ b/tests/test-share.t
@@ -157,251 +157,16 @@
   $ cd ..
 
 
-test sharing bookmarks
-
-  $ hg share -B repo1 repo3
-  updating working directory
-  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
-  $ cd repo1
-  $ hg bookmark bm1
-  $ hg bookmarks
-   * bm1                       2:c2e0ac586386
-  $ cd ../repo2
-  $ hg book bm2
-  $ hg bookmarks
-   * bm2                       3:0e6e70d1d5f1
-  $ cd ../repo3
-  $ hg bookmarks
-     bm1                       2:c2e0ac586386
-  $ hg book bm3
-  $ hg bookmarks
-     bm1                       2:c2e0ac586386
-   * bm3                       2:c2e0ac586386
-  $ cd ../repo1
-  $ hg bookmarks
-   * bm1                       2:c2e0ac586386
-     bm3                       2:c2e0ac586386
-
-check whether HG_PENDING makes pending changes only in relatd
-repositories visible to an external hook.
-
-In "hg share" case, another transaction can't run in other
-repositories sharing same source repository, because starting
-transaction requires locking store of source repository.
-
-Therefore, this test scenario ignores checking visibility of
-.hg/bookmakrs.pending in repo2, which shares repo1 without bookmarks.
-
-  $ cat > $TESTTMP/checkbookmarks.sh <<EOF
-  > echo "@repo1"
-  > hg -R "$TESTTMP/repo1" bookmarks
-  > echo "@repo2"
-  > hg -R "$TESTTMP/repo2" bookmarks
-  > echo "@repo3"
-  > hg -R "$TESTTMP/repo3" bookmarks
-  > exit 1 # to avoid adding new bookmark for subsequent tests
-  > EOF
-
-  $ cd ../repo1
-  $ hg --config hooks.pretxnclose="sh $TESTTMP/checkbookmarks.sh" -q book bmX
-  @repo1
-     bm1                       2:c2e0ac586386
-     bm3                       2:c2e0ac586386
-   * bmX                       2:c2e0ac586386
-  @repo2
-   * bm2                       3:0e6e70d1d5f1
-  @repo3
-     bm1                       2:c2e0ac586386
-   * bm3                       2:c2e0ac586386
-     bmX                       2:c2e0ac586386
-  transaction abort!
-  rollback completed
-  abort: pretxnclose hook exited with status 1
-  [255]
-  $ hg book bm1
-
-FYI, in contrast to above test, bmX is invisible in repo1 (= shared
-src), because (1) HG_PENDING refers only repo3 and (2)
-"bookmarks.pending" is written only into repo3.
-
-  $ cd ../repo3
-  $ hg --config hooks.pretxnclose="sh $TESTTMP/checkbookmarks.sh" -q book bmX
-  @repo1
-   * bm1                       2:c2e0ac586386
-     bm3                       2:c2e0ac586386
-  @repo2
-   * bm2                       3:0e6e70d1d5f1
-  @repo3
-     bm1                       2:c2e0ac586386
-     bm3                       2:c2e0ac586386
-   * bmX                       2:c2e0ac586386
-  transaction abort!
-  rollback completed
-  abort: pretxnclose hook exited with status 1
-  [255]
-  $ hg book bm3
-
-  $ cd ../repo1
-
-test that commits work
-
-  $ echo 'shared bookmarks' > a
-  $ hg commit -m 'testing shared bookmarks'
-  $ hg bookmarks
-   * bm1                       3:b87954705719
-     bm3                       2:c2e0ac586386
-  $ cd ../repo3
-  $ hg bookmarks
-     bm1                       3:b87954705719
-   * bm3                       2:c2e0ac586386
-  $ echo 'more shared bookmarks' > a
-  $ hg commit -m 'testing shared bookmarks'
-  created new head
-  $ hg bookmarks
-     bm1                       3:b87954705719
-   * bm3                       4:62f4ded848e4
-  $ cd ../repo1
-  $ hg bookmarks
-   * bm1                       3:b87954705719
-     bm3                       4:62f4ded848e4
-  $ cd ..
-
 non largefiles repos won't enable largefiles
 
-  $ hg share --config extensions.largefiles= repo3 sharedrepo
+  $ hg share --config extensions.largefiles= repo2 sharedrepo
   The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
   The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
   updating working directory
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ [ -f sharedrepo/.hg/hgrc ]
   [1]
 
-test pushing bookmarks works
-
-  $ hg clone repo3 repo4
-  updating to branch default
-  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
-  $ cd repo4
-  $ hg boo bm4
-  $ echo foo > b
-  $ hg commit -m 'foo in b'
-  $ hg boo
-     bm1                       3:b87954705719
-     bm3                       4:62f4ded848e4
-   * bm4                       5:92793bfc8cad
-  $ hg push -B bm4
-  pushing to $TESTTMP/repo3
-  searching for changes
-  adding changesets
-  adding manifests
-  adding file changes
-  added 1 changesets with 1 changes to 1 files
-  exporting bookmark bm4
-  $ cd ../repo1
-  $ hg bookmarks
-   * bm1                       3:b87954705719
-     bm3                       4:62f4ded848e4
-     bm4                       5:92793bfc8cad
-  $ cd ../repo3
-  $ hg bookmarks
-     bm1                       3:b87954705719
-   * bm3                       4:62f4ded848e4
-     bm4                       5:92793bfc8cad
-  $ cd ..
-
-test behavior when sharing a shared repo
-
-  $ hg share -B repo3 missingdir/repo5
-  updating working directory
-  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
-  $ cd missingdir/repo5
-  $ hg book
-     bm1                       3:b87954705719
-     bm3                       4:62f4ded848e4
-     bm4                       5:92793bfc8cad
-  $ cd ../..
-
-test what happens when an active bookmark is deleted
-
-  $ cd repo1
-  $ hg boo -d bm3
-  $ hg boo
-   * bm1                       3:b87954705719
-     bm4                       5:92793bfc8cad
-  $ cd ../repo3
-  $ hg boo
-     bm1                       3:b87954705719
-     bm4                       5:92793bfc8cad
-  $ cd ..
-
-verify that bookmarks are not written on failed transaction
-
-  $ cat > failpullbookmarks.py << EOF
-  > """A small extension that makes bookmark pulls fail, for testing"""
-  > from __future__ import absolute_import
-  > from mercurial import (
-  >   error,
-  >   exchange,
-  >   extensions,
-  > )
-  > def _pullbookmarks(orig, pullop):
-  >     orig(pullop)
-  >     raise error.HookAbort('forced failure by extension')
-  > def extsetup(ui):
-  >     extensions.wrapfunction(exchange, '_pullbookmarks', _pullbookmarks)
-  > EOF
-  $ cd repo4
-  $ hg boo
-     bm1                       3:b87954705719
-     bm3                       4:62f4ded848e4
-   * bm4                       5:92793bfc8cad
-  $ cd ../repo3
-  $ hg boo
-     bm1                       3:b87954705719
-     bm4                       5:92793bfc8cad
-  $ hg --config "extensions.failpullbookmarks=$TESTTMP/failpullbookmarks.py" pull $TESTTMP/repo4
-  pulling from $TESTTMP/repo4
-  searching for changes
-  no changes found
-  adding remote bookmark bm3
-  abort: forced failure by extension
-  [255]
-  $ hg boo
-     bm1                       3:b87954705719
-     bm4                       5:92793bfc8cad
-  $ hg pull $TESTTMP/repo4
-  pulling from $TESTTMP/repo4
-  searching for changes
-  no changes found
-  adding remote bookmark bm3
-  1 local changesets published
-  $ hg boo
-     bm1                       3:b87954705719
-   * bm3                       4:62f4ded848e4
-     bm4                       5:92793bfc8cad
-  $ cd ..
-
-verify bookmark behavior after unshare
-
-  $ cd repo3
-  $ hg unshare
-  $ hg boo
-     bm1                       3:b87954705719
-   * bm3                       4:62f4ded848e4
-     bm4                       5:92793bfc8cad
-  $ hg boo -d bm4
-  $ hg boo bm5
-  $ hg boo
-     bm1                       3:b87954705719
-     bm3                       4:62f4ded848e4
-   * bm5                       4:62f4ded848e4
-  $ cd ../repo1
-  $ hg boo
-   * bm1                       3:b87954705719
-     bm3                       4:62f4ded848e4
-     bm4                       5:92793bfc8cad
-  $ cd ..
-
 test shared clones using relative paths work
 
   $ mkdir thisdir
diff --git a/tests/test-share.t b/tests/test-share-bookmarks.t
copy from tests/test-share.t
copy to tests/test-share-bookmarks.t
--- a/tests/test-share.t
+++ b/tests/test-share-bookmarks.t
@@ -8,143 +8,23 @@
   $ echo a > a
   $ hg commit -A -m'init'
   adding a
+  $ echo a >> a
+  $ hg commit -m'change in shared clone'
+  $ echo b > b
+  $ hg commit -A -m'another file'
+  adding b
 
 share it
 
   $ cd ..
   $ hg share repo1 repo2
   updating working directory
-  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
-share shouldn't have a store dir
+unshare it
 
   $ cd repo2
-  $ test -d .hg/store
-  [1]
-
-share shouldn't have a full cache dir, original repo should
-
-  $ hg branches
-  default                        0:d3873e73d99e
-  $ hg tags
-  tip                                0:d3873e73d99e
-  $ test -d .hg/cache
-  [1]
-  $ ls -1 .hg/wcache || true
-  checkisexec (execbit !)
-  checklink (symlink !)
-  checklink-target (symlink !)
-  manifestfulltextcache (reporevlogstore !)
-  $ ls -1 ../repo1/.hg/cache
-  branch2-served
-  rbc-names-v1
-  rbc-revs-v1
-  tags2-visible
-
-Some sed versions appends newline, some don't, and some just fails
-
-  $ cat .hg/sharedpath; echo
-  $TESTTMP/repo1/.hg
-
-trailing newline on .hg/sharedpath is ok
-  $ hg tip -q
-  0:d3873e73d99e
-  $ echo '' >> .hg/sharedpath
-  $ cat .hg/sharedpath
-  $TESTTMP/repo1/.hg
-  $ hg tip -q
-  0:d3873e73d99e
-
-commit in shared clone
-
-  $ echo a >> a
-  $ hg commit -m'change in shared clone'
-
-check original
-
-  $ cd ../repo1
-  $ hg log
-  changeset:   1:8af4dc49db9e
-  tag:         tip
-  user:        test
-  date:        Thu Jan 01 00:00:00 1970 +0000
-  summary:     change in shared clone
-  
-  changeset:   0:d3873e73d99e
-  user:        test
-  date:        Thu Jan 01 00:00:00 1970 +0000
-  summary:     init
-  
-  $ hg update
-  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
-  $ cat a             # should be two lines of "a"
-  a
-  a
-
-commit in original
-
-  $ echo b > b
-  $ hg commit -A -m'another file'
-  adding b
-
-check in shared clone
-
-  $ cd ../repo2
-  $ hg log
-  changeset:   2:c2e0ac586386
-  tag:         tip
-  user:        test
-  date:        Thu Jan 01 00:00:00 1970 +0000
-  summary:     another file
-  
-  changeset:   1:8af4dc49db9e
-  user:        test
-  date:        Thu Jan 01 00:00:00 1970 +0000
-  summary:     change in shared clone
-  
-  changeset:   0:d3873e73d99e
-  user:        test
-  date:        Thu Jan 01 00:00:00 1970 +0000
-  summary:     init
-  
-  $ hg update
-  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
-  $ cat b             # should exist with one "b"
-  b
-
-hg serve shared clone
-
-  $ hg serve -n test -p $HGPORT -d --pid-file=hg.pid
-  $ cat hg.pid >> $DAEMON_PIDS
-  $ get-with-headers.py localhost:$HGPORT 'raw-file/'
-  200 Script output follows
-  
-  
-  -rw-r--r-- 4 a
-  -rw-r--r-- 2 b
-  
-  
-Cloning a shared repo via bundle2 results in a non-shared clone
-
-  $ cd ..
-  $ hg clone -q --stream --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/`pwd`/repo2 cloned-via-bundle2
-  $ cat ./cloned-via-bundle2/.hg/requires | grep "shared"
-  [1]
-  $ hg id --cwd cloned-via-bundle2 -r tip
-  c2e0ac586386 tip
-  $ cd repo2
-
-test unshare command
-
   $ hg unshare
-  $ test -d .hg/store
-  $ test -f .hg/sharedpath
-  [1]
-  $ grep shared .hg/requires
-  [1]
-  $ hg unshare
-  abort: this is not a shared repo
-  [255]
 
 check that a change does not propagate
 
@@ -156,7 +36,6 @@
 
   $ cd ..
 
-
 test sharing bookmarks
 
   $ hg share -B repo1 repo3
@@ -266,16 +145,6 @@
      bm3                       4:62f4ded848e4
   $ cd ..
 
-non largefiles repos won't enable largefiles
-
-  $ hg share --config extensions.largefiles= repo3 sharedrepo
-  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
-  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
-  updating working directory
-  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
-  $ [ -f sharedrepo/.hg/hgrc ]
-  [1]
-
 test pushing bookmarks works
 
   $ hg clone repo3 repo4
@@ -401,81 +270,3 @@
      bm3                       4:62f4ded848e4
      bm4                       5:92793bfc8cad
   $ cd ..
-
-test shared clones using relative paths work
-
-  $ mkdir thisdir
-  $ hg init thisdir/orig
-  $ hg share -U thisdir/orig thisdir/abs
-  $ hg share -U --relative thisdir/abs thisdir/rel
-  $ cat thisdir/rel/.hg/sharedpath
-  ../../orig/.hg (no-eol)
-  $ grep shared thisdir/*/.hg/requires
-  thisdir/abs/.hg/requires:shared
-  thisdir/rel/.hg/requires:relshared
-  thisdir/rel/.hg/requires:shared
-
-test that relative shared paths aren't relative to $PWD
-
-  $ cd thisdir
-  $ hg -R rel root
-  $TESTTMP/thisdir/rel
-  $ cd ..
-
-now test that relative paths really are relative, survive across
-renames and changes of PWD
-
-  $ hg -R thisdir/abs root
-  $TESTTMP/thisdir/abs
-  $ hg -R thisdir/rel root
-  $TESTTMP/thisdir/rel
-  $ mv thisdir thatdir
-  $ hg -R thatdir/abs root
-  abort: .hg/sharedpath points to nonexistent directory $TESTTMP/thisdir/orig/.hg!
-  [255]
-  $ hg -R thatdir/rel root
-  $TESTTMP/thatdir/rel
-
-test unshare relshared repo
-
-  $ cd thatdir/rel
-  $ hg unshare
-  $ test -d .hg/store
-  $ test -f .hg/sharedpath
-  [1]
-  $ grep shared .hg/requires
-  [1]
-  $ hg unshare
-  abort: this is not a shared repo
-  [255]
-  $ cd ../..
-
-  $ rm -r thatdir
-
-Demonstrate buggy behavior around requirements validation
-See comment in localrepo.py:makelocalrepository() for more.
-
-  $ hg init sharenewrequires
-  $ hg share sharenewrequires shareoldrequires
-  updating working directory
-  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
-
-  $ cat >> sharenewrequires/.hg/requires << EOF
-  > missing-requirement
-  > EOF
-
-We cannot open the repo with the unknown requirement
-
-  $ hg -R sharenewrequires status
-  abort: repository requires features unknown to this Mercurial: missing-requirement!
-  (see https://mercurial-scm.org/wiki/MissingRequirement for more information)
-  [255]
-
-BUG: we don't get the same error when opening the shared repo pointing to it
-
-  $ hg -R shareoldrequires status
-
-Explicitly kill daemons to let the test exit on Windows
-
-  $ killdaemons.py
-



To: martinvonz, #hg-reviewers, pulkit
Cc: mjpieters, mercurial-devel


More information about the Mercurial-devel mailing list