Differences between revisions 40 and 41
Revision 40 as of 2015-01-29 05:13:54
Size: 12008
Editor: mpm
Comment:
Revision 41 as of 2015-01-29 05:16:40
Size: 12006
Editor: mpm
Comment:
Deletions are marked like this. Additions are marked like this.
Line 85: Line 85:
Lastly, let's imagine Y'' and Z'' really ought to be one commit. We can "collapse" them thusly: Lastly, let's imagine Y3 and Z3 really ought to be one commit. We can "collapse" them thusly:

Rebase Extension

This extension is distributed along with Mercurial releases

Author: Stefano Tortarolo

1. Introduction

Rebase allows moving commits around in Mercurial's history (using a series of internal merges). This has many uses:

  • moving changesets between branches
  • "linearizing" history
  • reordering changesets
  • collapsing multiple changes into one changeset

2. Configuration

Enable the extension in the configuration file (e.g. .hg/hgrc):

[extensions]
rebase =

3. Basic usage

Let's imagine our repository looks like this:

Here we have local commits X through Z diverging from the upstream line of history A through E. We can easily "linearize" the history by running:

$ hg rebase -s X -d E

This command will take commit from the source X and all its descendants and "move" them to descend instead from the destination E:

<!> Note: moving changesets changes their changeset hashes and revision numbers. Thus we've given our changesets updated names.

Now let's imagine we decided commit X2 was a mistake. We could fix this by moving Y2 to descend from E and then strip X2:

$ hg rebase -s Y2 -d E

$ hg strip X2

Lastly, let's imagine Y3 and Z3 really ought to be one commit. We can "collapse" them thusly:

$ hg rebase -r Y2::Z2 -d E --collapse

Just about any rearrangement of history is possible with a series of rebases. See histedit for a tool that helps automate some of the more common tasks.

4. Dealing with conflicting merges

A situation could arise where some changes we're rebasing conflict with some changes in the destination. In these cases, the extension will stop, store the current status, and provide the user with the ability to solve the conflict on his own.

In event of an interruption, users have two choices:

  • abort
  • continue

4.1. Abort

An interrupted process can be aborted, thus restoring the repository to its original state, with:

$ hg rebase --abort

4.2. Continue

The most common situation, however, is resuming an interrupted process and this can be done with:

$ hg rebase --continue

5. When rebase is not allowed

There are situations in which a rebasing process is not allowed:

  • the rebasing point (source) is an ancestor of target
  • the rebasing point (source) is a merge revision and both of its parents are external

6. Notes about MQ Patches

In the current implementation MQ patches are qfinished and qimported after being rebased. This adds an export-like header to each rebased patch. e.g.,

  • Original patch:
    Description P0
    
    diff --git a/f b/f
    etc...
  • Rebased patch:
    # HG changeset patch
    # User Stefano Tortarolo <stefano.tortarolo@gmail.com>
    # Date 1217929313 -7200
    # Node ID 92bd85e9196feac01fdf2eb2ce7275e9a575a730
    # Parent  6e55161e68b2062d629c05b89b0ea3424eec9a2f
    Description P0
    
    diff --git a/f b/f
    etc...

7. Scenarios

Now will be analyzed the most interesting scenarios.

7.1. Scenario A

The first one is the simplest one, a simple branch.

In this scenario there are two interesting interactions:

7.1.1. rebase on top

$ hg up C
$ hg rebase --dest E

Another syntax that would yield the same result is:

$ hg rebase --dest E --base C

7.1.2. rebase on an intermediate revision

$ hg up C
$ hg rebase -d D

7.2. Scenario B

The second scenario involves something more complicated. In this scenario the user cloned from upstream, then merged several times.

7.2.1. rebase D on I

$ hg rebase --dest I --source D

  • Despite being a merge revision D hasn't been skipped in this case, as opposite to H.

7.2.2. rebase B on I

$ hg rebase --dest I --source B

  • In this case two revisions (D and H) have been skipped.

7.2.3. rebase C on B

$ hg rebase --dest B --source C

7.2.4. rebase G onto I

$ hg rebase --dest I --source G

Note: Prior Mercurial 2.3 you need to had --detach option in this situation. otherwise you get this result

7.3. Scenario C

This case represents a quite common situation, a repository with just one (merge) head.

7.3.1. D onto C

$ hg rebase --dest C --source D

  • Obviously the revision F has been skipped.

7.4. Collapsing

Sometimes it could be useful to be able to rebase changesets onto another branch, obtaining though just one revision.

This can be achieved using the option --collapse.

$ hg rebase --dest B --source C --collapse

or

The base option could have been used here too

$ hg rebase --dest B --base E --collapse

7.4.1. C onto B and collapsing

8. Details

8.1. Parent relationships

Rebase tries to turn <dest> into a parent of <root> while preserving the number of parents of rebased changesets:

  • A changeset with a single parent will always be rebased as a
    • changeset with a single parent.
  • A merge will be rebased as merge unless its parents are both
    • ancestors of <dest> or are themselves in the rebased set and pruned while rebased.

If one parent of <root> is an ancestor of <dest>, the rebased version of this parent will be <dest>. This is always true with --base option.

Otherwise, we need to replace the original parents with <dest>. This detaches the rebased set from its former location and rebases it onto <dest>. Changes introduced by ancestors of <root> not common with <dest> are removed from the rebased changesets.

  • If <root> has a single parent, set it to <dest>.

  • If <root> is a merge, we cannot decide which parent to

    • replace, the rebase operation is not clearly defined. This kind of rebase is not allowed.

The table below sums up this behavior:

one parent

merge

parent in ::<dest>

new parent is <dest>

parents in ::<dest> are remapped to <dest>

unrelated source

new parent is <dest>

ambiguous, abort

9. Command documentation

As of Mercurial 2.4, here is the official documentation of the rebase command.

    Rebase uses repeated merging to graft changesets from one part of history
    (the source) onto another (the destination). This can be useful for
    linearizing *local* changes relative to a master development tree.

    You should not rebase changesets that have already been shared with
    others. Doing so will force everybody else to perform the same rebase or
    they will end up with duplicated changesets after pulling in your rebased
    changesets.

    If you don't specify a destination changeset ("-d/--dest"), rebase uses
    the tipmost head of the current named branch as the destination. (The
    destination changeset is not modified by rebasing, but new changesets are
    added as its descendants.)

    You can specify which changesets to rebase in two ways: as a "source"
    changeset or as a "base" changeset. Both are shorthand for a topologically
    related set of changesets (the "source branch"). If you specify source
    ("-s/--source"), rebase will rebase that changeset and all of its
    descendants onto dest. If you specify base ("-b/--base"), rebase will
    select ancestors of base back to but not including the common ancestor
    with dest. Thus, "-b" is less precise but more convenient than "-s": you
    can specify any changeset in the source branch, and rebase will select the
    whole branch. If you specify neither "-s" nor "-b", rebase uses the parent
    of the working directory as the base.

    By default, rebase recreates the changesets in the source branch as
    descendants of dest and then destroys the originals. Use "--keep" to
    preserve the original source changesets. Some changesets in the source
    branch (e.g. merges from the destination branch) may be dropped if they no
    longer contribute any change.

    One result of the rules for selecting the destination changeset and source
    branch is that, unlike "merge", rebase will do nothing if you are at the
    latest (tipmost) head of a named branch with two heads. You need to
    explicitly specify source and/or destination (or "update" to the other
    head, if it's the head of the intended source branch).

    If a rebase is interrupted to manually resolve a merge, it can be
    continued with --continue/-c or aborted with --abort/-a.

    Returns 0 on success, 1 if nothing to rebase.


CategoryBundledExtension

日本語

RebaseExtension (last edited 2017-03-28 19:44:56 by SietseBrouwer)